Do harsh conditions affect measurement performance? Not at all!

Do harsh conditions affect measurement performance? Not at all! von Lika Electronic

Von: Lika Electronic  04.06.2012
Keywords: Meß und Regeltechnik, Elektromechanische Komponenten und Geräte, Glasbauteile

Born out of Lika's long-standing, solid experience in wind power industry, C100 incremental encoder was first designed for feedback of generators in wind turbines, but today it has successfully established itself into a great variety of applications even in the harshest industrial environments such as in large size electric motors and generators, iron and steel mills, cranes, portal cranes and hoists, marine installations, offshore platforms and equipment. C100 is the sturdy heavy-duty encoder designed to reliably operate and ensure profitable efficiency in demanding installations. It enhances precision and performance and provides smooth, safe, unlimited and low cost operation. The cutting edge technology of C100 measures up to extreme requirements. A well-encapsulated aluminium housing is claimed to withstand wide temperature fluctuations (extended operating range between -40°C and +100°C) and heavy mechanical stresses (radial shaft loading up to 350 N) with IP65 protection rate; moreover it is protected by surface treatments against salt water and corrosion. Blind hollow or tapered shaft is electrically insulated (up to 10 kV) in order to preserve the robust ball bearings from damages due to eddy currents. These characteristics are all intended to ensure maximum service life and minimum downtimes in continuous operation. Also optical and electronic components as well as cables and connectors have been selected to always cope with such stringent requirements. C100 features a full range of resolutions up to 10000 PPR with Line Driver and Lika's proven Universal incremental interfaces. Safe signal transmission at high counting frequency is granted even over long distances up to 300 m thanks to new high-performance Power Push-Pull and Power Line Driver output circuits which considerably reduce quality degradation or loss of signals on long cables run for maximum reliability without the need for repeaters or amplifiers. Today, along with standard M23 12-pin connector and cable outputs, C100 offers a further benefit: it is equipped with terminal blocks for greater comfort and convenience of installations requiring special cables. To ensure maximum stability and safe operating condition, C100 is optionally fitted with a flexible torque arm which prevents the encoder from rotating while permits all other movements at the same time thus preserving the shaft and the internal bearings. Finally C101 model is the unrivalled redundant version fitted with galvanically separated double output circuits for maximum safety requirements. It ensures the utmost safety in critical applications where failures could lead to unacceptable risks of personal injury, costly machinery damages and burdensome downtimes. Redundant version can be further installed to feed separate signals to independent applications.

Keywords: Drehgeber, Electronic, Elektromechanische Komponenten und Geräte, Encoder, Encoder Incremental, Glasbauteile, Meß und Regeltechnik, Messsysteme, Windanlagen, Windenergieanlagen, Windindustrie, Winkelschrittgeber,

Lika Electronic kontaktieren

E-Mail

Diese Seite drucken

Weitere Produkte und Dienstleistungen von Lika Electronic

Encoders for Industrial Robots, Motors and OEM applications von Lika Electronic Vorschau
05.12.2016

Encoders for Industrial Robots, Motors and OEM applications

At latest SPS IPC Drives exhibition in Nuremberg Lika Electronic especially focused on the range of encoders designed to be integrated into robotic systems as well as into motors and OEM applications. They are compact and modular and tailored to exactly meet the specific needs of the individual automation processes.


RD6 – Intelligenter Stellantrieb für schnelle Formatwechsel von Lika Electronic Vorschau
27.10.2016

RD6 – Intelligenter Stellantrieb für schnelle Formatwechsel

Der RD6 ist ein kompakter und leistungsstarker Stellantrieb für schnelle Formatwechsel. Er vereint bürstenlosen Motor, echten Multiturn-Absolutwertgeber, geschlossenes Regelsystem für Position und Drehmoment sowie eine Feldbusschnittstelle in einem einzigen Gehäuse.


Lika's SMA2 HIGH PERFORMANCE Linearmesssystem von Lika Electronic Vorschau
27.10.2016

Lika's SMA2 HIGH PERFORMANCE Linearmesssystem

Der magnetische Linear-Encoder SMA2 von Lika Electronic bietet eine bessere Auflösung bei höherer Geschwindigkeit und einem größeren Messbereich: Er ist perfekt für anspruchsvolle Anwendungen wie z.B. Linearmotoren geeignet, die ein sehr präzises Positions- und Geschwindigkeitsfeedback erfordern.


Auf Kundenwunsch auch in der Schwerindustrie von Lika Electronic Vorschau
21.10.2016

Auf Kundenwunsch auch in der Schwerindustrie

Schon seit der Firmengründung vor über 35 Jahren stehen bei Lika kundenspezifische Anpassungen immer ganz weit vorne. Trotz der vielen namhaften Anbieter und bestehende Produkte im Bereich Heavy-Duty helfen wir unseren Kunden ständig mit neuen und ausgefallenen Geberlösungen. Vollwellen-, Hohlwellen- und lagerlose Geber sind sowohl inkrementell als auch absolut verfügbar und können flexibel nach dem Lika-Baukasten-System auf Wunsch angepasst werden.


ATEX certified encoders von Lika Electronic Vorschau
21.10.2016

ATEX certified encoders

Lika Electronic has developed a comprehensive range of ATEX certified encoders: XC77 series, XAC77 series and XAC80 series. They are designed to cover a wide variety of critical applications in hazardous and harsh areas “in which explosive atmospheres caused by gases, vapours, mists or air/dust mixtures are likely to occur occasionally” (category 2 encoders) and “in which explosive atmospheres caused by gases, vapours, mists, or air/dust mixtures are unlikely to occur or, if they do occur, are


All-round wheeled encoder for conveyor systems von Lika Electronic Vorschau
17.04.2015

All-round wheeled encoder for conveyor systems

IR01 is the underbelt measuring system encompassing a double rubber wheel with integrated incremental encoder and the mounting support in the same package. Easy to install, it tracks displacements more precisely.


Ein Geber ersetzt 65.536 Geber von Lika Electronic Vorschau
17.04.2015

Ein Geber ersetzt 65.536 Geber

Die inkrementellen, programmierbaren Geber IQ58 und IP58 wurden von Lika Electronic mit der Maßgabe entwickelt, so universell und anpassungsfähig zu sein, wie der Kunde sie braucht. Dank der Möglichkeit, die Geber vollständig zu parametrieren und der Vielfalt an mechanischen und elektrischen Anschlussmöglichkeiten, sind diese so flexibel und anpassungsfähig, dass die meisten Anforderungen industrieller Anwendungen abgedeckt werden können.


Programmable draw-wire encoder, a first for market! von Lika Electronic Vorschau
17.04.2015

Programmable draw-wire encoder, a first for market!

Lika Electronic introduces a new range of incremental and absolute draw-wire encoders with increased measuring lengths up to 5,000 mm (196.85”) and 10,000 mm (393.7”). Worthy of remark the first cable-pulling measuring system with integral programmable incremental encoder.


SMP encoder for linear guideways von Lika Electronic Vorschau
03.03.2015

SMP encoder for linear guideways

SMP is the magnetic encoder designed for feedback on linear guideways, carriages, slides, positioning tables and all applications that need the scale to be mounted laterally.


One encoder, 16,384 encoders von Lika Electronic Vorschau
02.02.2015

One encoder, 16,384 encoders

IQ58/CKQ58 programmable incremental encoder from Lika Electronic is conceived to be as multipurpose and adaptive as you need it to be. Discover how its complete programmability and the several mechanical and electrical configurations guarantee the flexibility and versatility to perfectly meet the widest of specific industrial requirements.


Best in price analogue encoder von Lika Electronic Vorschau
13.11.2014

Best in price analogue encoder

With its quality feature set and the attractive price tag, MS40 series from Lika Electronic further grows adding the 4-20 mA and 0-10V analogue interface today.


Tough for rough! von Lika Electronic Vorschau
13.11.2014

Tough for rough!

MMK36 is the only multiturn absolute encoder with bearingless shaft in the market. Still it is capable of reliably and safely withstanding the most aggressive environmental conditions and ideally suited even for position measurements at speeds up to 4,000 RPM.


SFP draw-wire encoders gain analogue outputs von Lika Electronic Vorschau
08.10.2014

SFP draw-wire encoders gain analogue outputs

Lika Electronic is releasing new SFP series cable-pulling encoders that provide linear position feedback over distances from 300 mm / 11.8” to 2000 mm / 78.7” and analogue outputs now.


SSI to Profibus IF55 gateway von Lika Electronic Vorschau
08.10.2014

SSI to Profibus IF55 gateway

Connect your Lika SSI encoder to Profibus with the new IF55 gateway. IF55 gateway allows complete integration and full compliance with the Profibus-DP protocol.


Change-over at your fingertips von Lika Electronic Vorschau
17.09.2014

Change-over at your fingertips

LDT10 is the HMI touch panel specifically designed to easily interface and configure Lika RD rotary actuators, so auxiliary axes are more intuitive to operate and change-over operations become as fast as one touch.