New PROFINET encoders from Lika Electronic

New PROFINET encoders from Lika Electronic von Lika Electronic

Von: Lika Electronic  03.12.2013
Keywords: Meß und Regeltechnik, Automatisierung, Elektromechanische Komponenten und Geräte

Both the low cost EM58 series and the high resolution HS58/HM58 series from Lika Electronic are available with Profinet IO interface today. PROFINET is the 100% Ethernet compatible open standard for Industrial Ethernet. Spreading increasingly and rapidly at all levels, Ethernet industrial technology enables improved performances and allows to meet efficiency and productivity requirements in any complex industrial system. Real time communication, deterministic synchronization, high speed up to 100 Mbit/s full duplex over long distances, flexible network topologies, complete diagnostics, IT integration are among the key benefits. Profinet IO encoders from Lika Electronic fully comply with the Encoder Profile Specifications V4.1 version 3.162 based on the PROFIdrive profile. Furthermore they fulfill the requirements of the Application Classes 3 and 4, thus they support both the RT real-time transmission mode and the IRT isochronous real-time mode to meet precise and deterministic data exchange needs (jitter less than 1 µs and cycle time down to 1 ms). The standard TCP/IP channel is used for parametrization, configuration and acyclic read/write operations. The most frequent network topologies can be implemented and even mixed together including Star, Line, Tree and Ring structures. The number of nodes is virtually unlimited. Profinet encoders support the standard telegrams 81, 82, 83 and 84: full scaling, preset, code sequence, position and velocity readout, diagnostic information etc. functions are implemented. EM58 is the low cost multiturn version offering 27-bit resolution (8192 cpr x 16384 rev.). H- high resolution series comes in both singleturn (18-bit resolution, 262144 cpr) and multiturn (30-bit resolution, 65536 cpr x 16384 rev.) versions. Mechanically they afford standard 58-mm flange diameter housing with both hollow (Ø 14, 15 mm) and solid (Ø 6, 8, 9.52, 10, 12 mm) shafts. Capable of 6.000 RPM and working temperatures between -25°C and +85 °C (-13°F +185°F) they provide IP65-rated protection. M12 D-coding connector and AWG 22, cat. 5 cable outputs are available: they comply with Profinet standards and allow for simplified and safe connectivity, thus saving time and money whilst minimizing the risk of errors. LEDs for visual diagnostic information are further used.

Keywords: Automatisierung, Drehgeber, Elektromechanische Komponenten und Geräte, Encoder, Encoder Absolute, Fieldbus, Galsbauteile, Lika Electronic, Meß und Regeltechnik, Messsysteme, Motion Control, Multiturngeber, Profibus, Profinet, Prozesstechnik,

Lika Electronic kontaktieren

E-Mail

Diese Seite drucken

Weitere Produkte und Dienstleistungen von Lika Electronic

RD6 – Intelligenter Stellantrieb für schnelle Formatwechsel von Lika Electronic Vorschau
27.10.2016

RD6 – Intelligenter Stellantrieb für schnelle Formatwechsel

Der RD6 ist ein kompakter und leistungsstarker Stellantrieb für schnelle Formatwechsel. Er vereint bürstenlosen Motor, echten Multiturn-Absolutwertgeber, geschlossenes Regelsystem für Position und Drehmoment sowie eine Feldbusschnittstelle in einem einzigen Gehäuse.


Lika's SMA2 HIGH PERFORMANCE Linearmesssystem von Lika Electronic Vorschau
27.10.2016

Lika's SMA2 HIGH PERFORMANCE Linearmesssystem

Der magnetische Linear-Encoder SMA2 von Lika Electronic bietet eine bessere Auflösung bei höherer Geschwindigkeit und einem größeren Messbereich: Er ist perfekt für anspruchsvolle Anwendungen wie z.B. Linearmotoren geeignet, die ein sehr präzises Positions- und Geschwindigkeitsfeedback erfordern.


Auf Kundenwunsch auch in der Schwerindustrie von Lika Electronic Vorschau
21.10.2016

Auf Kundenwunsch auch in der Schwerindustrie

Schon seit der Firmengründung vor über 35 Jahren stehen bei Lika kundenspezifische Anpassungen immer ganz weit vorne. Trotz der vielen namhaften Anbieter und bestehende Produkte im Bereich Heavy-Duty helfen wir unseren Kunden ständig mit neuen und ausgefallenen Geberlösungen. Vollwellen-, Hohlwellen- und lagerlose Geber sind sowohl inkrementell als auch absolut verfügbar und können flexibel nach dem Lika-Baukasten-System auf Wunsch angepasst werden.


ATEX certified encoders von Lika Electronic Vorschau
21.10.2016

ATEX certified encoders

Lika Electronic has developed a comprehensive range of ATEX certified encoders: XC77 series, XAC77 series and XAC80 series. They are designed to cover a wide variety of critical applications in hazardous and harsh areas “in which explosive atmospheres caused by gases, vapours, mists or air/dust mixtures are likely to occur occasionally” (category 2 encoders) and “in which explosive atmospheres caused by gases, vapours, mists, or air/dust mixtures are unlikely to occur or, if they do occur, are


All-round wheeled encoder for conveyor systems von Lika Electronic Vorschau
17.04.2015

All-round wheeled encoder for conveyor systems

IR01 is the underbelt measuring system encompassing a double rubber wheel with integrated incremental encoder and the mounting support in the same package. Easy to install, it tracks displacements more precisely.


Ein Geber ersetzt 65.536 Geber von Lika Electronic Vorschau
17.04.2015

Ein Geber ersetzt 65.536 Geber

Die inkrementellen, programmierbaren Geber IQ58 und IP58 wurden von Lika Electronic mit der Maßgabe entwickelt, so universell und anpassungsfähig zu sein, wie der Kunde sie braucht. Dank der Möglichkeit, die Geber vollständig zu parametrieren und der Vielfalt an mechanischen und elektrischen Anschlussmöglichkeiten, sind diese so flexibel und anpassungsfähig, dass die meisten Anforderungen industrieller Anwendungen abgedeckt werden können.


Programmable draw-wire encoder, a first for market! von Lika Electronic Vorschau
17.04.2015

Programmable draw-wire encoder, a first for market!

Lika Electronic introduces a new range of incremental and absolute draw-wire encoders with increased measuring lengths up to 5,000 mm (196.85”) and 10,000 mm (393.7”). Worthy of remark the first cable-pulling measuring system with integral programmable incremental encoder.


SMP encoder for linear guideways von Lika Electronic Vorschau
03.03.2015

SMP encoder for linear guideways

SMP is the magnetic encoder designed for feedback on linear guideways, carriages, slides, positioning tables and all applications that need the scale to be mounted laterally.


One encoder, 16,384 encoders von Lika Electronic Vorschau
02.02.2015

One encoder, 16,384 encoders

IQ58/CKQ58 programmable incremental encoder from Lika Electronic is conceived to be as multipurpose and adaptive as you need it to be. Discover how its complete programmability and the several mechanical and electrical configurations guarantee the flexibility and versatility to perfectly meet the widest of specific industrial requirements.


Best in price analogue encoder von Lika Electronic Vorschau
13.11.2014

Best in price analogue encoder

With its quality feature set and the attractive price tag, MS40 series from Lika Electronic further grows adding the 4-20 mA and 0-10V analogue interface today.


Tough for rough! von Lika Electronic Vorschau
13.11.2014

Tough for rough!

MMK36 is the only multiturn absolute encoder with bearingless shaft in the market. Still it is capable of reliably and safely withstanding the most aggressive environmental conditions and ideally suited even for position measurements at speeds up to 4,000 RPM.


SFP draw-wire encoders gain analogue outputs von Lika Electronic Vorschau
08.10.2014

SFP draw-wire encoders gain analogue outputs

Lika Electronic is releasing new SFP series cable-pulling encoders that provide linear position feedback over distances from 300 mm / 11.8” to 2000 mm / 78.7” and analogue outputs now.


SSI to Profibus IF55 gateway von Lika Electronic Vorschau
08.10.2014

SSI to Profibus IF55 gateway

Connect your Lika SSI encoder to Profibus with the new IF55 gateway. IF55 gateway allows complete integration and full compliance with the Profibus-DP protocol.


Change-over at your fingertips von Lika Electronic Vorschau
17.09.2014

Change-over at your fingertips

LDT10 is the HMI touch panel specifically designed to easily interface and configure Lika RD rotary actuators, so auxiliary axes are more intuitive to operate and change-over operations become as fast as one touch.


The bearingless solution for torque motors and heavy-duty applications von Lika Electronic Vorschau
17.09.2014

The bearingless solution for torque motors and heavy-duty applications

SMRI from Lika Electronic is the miniature encoder intended for installation in dynamic and demanding rotary motion systems. It ensures safe and reliable operation even in harsh environments. A wide range of custom ring diameters and resolutions is available on request.